Broilmaster SBG2500-1 - Manual (Page 10)

SBB00101-1-1007 Page 10
CART AND GRILL ASSEMBLY (cont.)
10. Pull clips off the pin which attaches the side shelf mounting
bracket to the side shelf and remove pin. Remove brackets
from side shelves. Attach two side shelf brackets to each cart
side with four (4) lock washers and 1/2” screws per side shelf
bracket. See Figure 5.
11. Insert and attach side shelves into side shelf brackets with one
pin and clip into the top opening on each side. See Figure 5.
Figure 5
12. Fit screw head on cutting board to the opening on side shelf
and lay the cutting board down. See Figure 6.
Figure 6
13. Place flame tamers over burners. Pins on burner box fit through
holes on flame tamer. See Figure 7.
14. Place cooking grids into grill. See Figure 7.
15. Place warming rack on top of grill body side walls. See Figure
7.
Figure 7
16. Remove ignitor button, insert AA battery positive side facing
out, replace ignitor button. See Figure 8.
Figure 8
+ -