Bulova BVA-SERIES 100 - Manual (Page 8)

SETTING NON-DATE MODELS
S Stte ep p 1 1:: Pull the crown to the “OUT” position.
S Stte ep p 2 2:: Turn the hands forward (clockwise) to set the time. In order to
prevent the hands from jumping when the crown is pushed in, set the
minute hand approximately 5 minutes ahead of the desired minute
marker; then, gently turn back to the same minute marker.
S Stte ep p 3 3:: Push the crown to the “IN” position without turning.
SETTING DATE AND DAY/DATE MODELS
S Stte ep p 1 1:: Pull the crown all the way to the “OUT” position.
S Stte ep p 2 2:: With the crown still in the “OUT” position, move hands for-
ward (clockwise) until you see the date (for date only) or both day
and date change. This establishes midnight.
S Stte ep p 3 3:: For AM time, continue to move the hands forward until the
minute hand is approximately 5 minutes ahead of the desired
minute marker; then, gently turn back to the same minute marker.
2
IN POSITION
OUT POSITION
IN POSITION
OUT POSITION
INTERMEDIATE
POSITION