Radio mode, Switching to radio mode, Rds functions (af, reg) – Blaupunkt MINNESOTA DJ32 User Manual

Page 11

DANSK

ENGLISH

DEUTSCH

FRANÇAIS

ALIANO

NEDERLANDS

SVENSKA

ESP

AÑOL

PORTUGUÊS

Radio mode

This unit is equipped with an RDS radio
receiver. Many of the receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears in the dis-
play as soon as it is received.

Switching to radio mode

If you are in cassette, CD changer/Com-
pact Drive MP3 or AUX mode,

➮

press the BND•TS button

“RADIO” appears in the display.

➮

keep pressing the SRC button

until “RADIO” appears in the dis-
play.

RDS functions (AF, REG)

The RDS functions AF (Alternative Fre-
quency) and REG (Regional) extend
your radio’s range of functions.

●

AF: If the RDS function is activated,
the unit automatically tunes into the
best receivable frequency for the
station that is currently set.

●

REG: At certain times, some radio
stations divide their programme
into regional programmes providing
different regional content. You can
use the REG function to prevent
the car radio from switching to al-
ternative frequencies that are
transmitting different programme
content.

Note:

●

REG must be separately activated/
deactivated in the menu.

Switching REG on/off

➮

Press the MENU button

➮

Keep pressing the or button

until “REG” appears in the dis-

play. “OFF” or “ON” is displayed
alongside “REG”.

➮

To switch REG on/off, press the

or button

When you have finished making your
changes,

➮

press the MENU button

Switching the RDS function on/off

To use the RDS functions (AF and
REG),

➮

press the TRAF•RDS button

;

for

longer than two seconds.

The RDS functions are active when
RDS lights up in the display.

Selecting the waveband /
memory bank

This unit can receive programmes
broadcast over the FM, MW and LW fre-
quency ranges.

There are three memory banks for the
FM range and one for each of the MW
and LW ranges.

Six stations can be stored on each
memory bank.

To switch between the memory banks
and wavebands.

➮

briefly press the BND•TS button

RADIO MODE