Behringer Eurolive F1220A - Manual (Page 8)

8 EUROLIVE F1220A User Manual
4. Audio Connectors
Both audio inputs of the BEHRINGER F1220A and the LINK OUTPUT connector are
fully balanced. To maximize interference compensation, try to establish balanced
connections to other equipment, whenever possible.
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)
Fig. 4.1: 1/4" TRS connector
output
For unbalanced use, pin 1 and pin 3
have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
1 2
3
1 2
3
Balanced use with XLR connectors
Fig. 4.2: XLR connectors
◊ Make sure that only competent people install your F1220A. They must
be sufficiently earthed during and after the installation process.
Otherwise, electrostatic discharges may negatively affect the
operating characteristics of your equipment.
5. Specifications
Output Power
RMS @ 1% THD 90 W / 8 Ω
Peak power 125 W / 8 Ω
Input
XLR connector (servo-balanced)
Sensitivity -50 dBu to +10 dBu
Input impedance 11 kΩ balanced; 30 kΩ unbalanced
¼" TRS jack (servo-balanced)
Sensitivity -50 dBu to +10 dBu
Input impedance 11 kΩ balanced; 30 kΩ unbalanced
Link Output
XLR connector
Loudspeaker System Data
Frequency response 60 Hz to 18 kHz (-10 dB)
Maximum sound pressure level 112 dB / 115 dB @ 1 m
Limiter optical
Equalizer
LOW 80 Hz / ±15 dB
MID 2.5 kHz / ±15 dB
HIGH 12 kHz / ±15 dB
Feedback Filter
Filter frequency 300 Hz to 6 kHz
Level reduction max. 15 dB
Power Supply
Power consumption max. 180 W
Mains voltage / Fuse
100 - 120 V~ (50/60 Hz) T 2.5 A H 250 V
220 - 230 V~ (50/60 Hz) T 1.25 A H 250 V
Mains connector standard IEC receptacle
Physical/Weight
Dimensions (H x W x D) approx. 14.2 x 22.8 x 16"
approx. 360 x 580 x 406 mm
Weight approx. 39.7 lbs / approx. 18 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.