Vizio S2920w-C0R - Quickstart Guide - Manual (Page 18)

BUTTON CONFIGURATION
There are 3 Functions that are triggered by 3 different button combinations on the Sound Bar.
Input
Power
Volume
+
-
Bluetooth Input
Back of Sound Bar
Function LED Behavior Description
Factory
Reset
All 12 LEDs will
flash 3 times:
Reset the Sound Bar to the factory default settings. To perform a Factory Reset, Press and Hold
the Bluetooth( ) and Volume Down (—) buttons for 5 seconds.
Note: This will erase all settings and preferences that you have set.
VIZIO TV
Remote
Control
Enable VIZIO TV Remote:
Disable VIZIO TV Remote:
Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume
of the sound bar. To enable/disable this function, Press and Hold the Power ( ) and
Volume Up ( + )buttons for 5 seconds.
Energy Star
Enable Energy Star:
Disable Energy Star:
When the Energy Star setting is enabled, the sound bar will automatically power down after
a period of inactivity. When disabled, the sound bar will remain powered on until you turn
it off. To enable/disable this function, Press and Hold the Power ( ) and Volume Down (—)
buttons for 5 seconds.
Note: Energy Star setting is enabled by default.