Vizio S3851w-D4 - Quickstart Guide - Manual (Page 18)

18
PROGRAMMING THE SOUND BAR
You can program your Sound Bar to accept TV remote IR commands. Press the Menu button on the remote, then use the Up/Down
buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
INPUT MENU
VIZIO
Ensure that both the Sound Bar
and TV remotes are pointed at
the front of the Sound Bar.
TV Remote
Function LED Behavior Description
Learn Volume
Down
(Waiting to learn)
Flash from
Left to Right
and back
continuously.
All of the LEDs will
blink twice to confirm.
Press the Play button to put the Sound Bar into learning mode. While the Sound
Bar is in learning mode, press the Volume Down button on the TV remote control.
All of the LED Indicators on the Sound Bar will flash two times indicating that it
has successfully recognized the TV remote.
Learn Volume Up Press the Play button to put the Sound Bar into learning mode. While the Sound
Bar is in learning mode, press the Volume Up button on the TV remote control.
All of the LED Indicators on the Sound Bar will flash two times indicating that it
has successfully recognized the TV remote.
Learn Mute Press the Play button to put the Sound Bar into learning mode. While the Sound
Bar is in learning mode, press the Mute button on the TV remote control. All of
the LED Indicators on the Sound Bar will flash two times indicating that it has
successfully recognized the TV remote.
Learn Vol -
Learn Vol +
Learn Mute
When programming your Sound
Bar, turn off your TV speakers. See
your TV’s manual for instructions
on how to do this.