Vizio S2121w-D0 - Quickstart Guide - Manual (Page 21)

19
There is no power.
• Press the POWER button on the remote control or on the top of your Sound Stand.
• Ensure the power cord is securely connected.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
There is no sound.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Stand.
• Press MUTE on the remote to ensure the Sound Stand is not muted.
• Press INPUT on the remote or on the top of your Sound Stand to select a different input source.
• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.
I hear buzzing,
humming, or
rattling.
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may
be with the original device.
• Connect your device to a different input on the Sound Stand.
• The subwoofer is powerful, either turn the bass down or remove any small objects (such as photo frames) away from
the Sound Stand. You can also place the Sound Stand on a shelf by itself.
The remote
isn’t working.
• Replace the remote batteries with new ones.
• Point the remote directly at the center of the Sound Stand when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application.
HELP & TROUBLESHOOTING