Constellation Audio Altair II Line Stage - Manual (Page 19)

19
Left-to-right balance seems off
1. If the unit has not warmed up for at least 15 to 30 minutes, there may be a temporary imbalance in
the volume control’s light-dependent resistors that will cause a slight channel imbalance. You can
compensate for this with the balance control, or just wait for the unit to warm up. Better yet, we
recommend leaving the Altair II on all the time for the best performance.
Balance and volume controls do not function
1. If you are using the input configured for home theater bypass, this situation is normal—volume and
balance controls do not function in this mode.
2. If you are not using an input configured for home theater bypass, you need to clear out the minimum
and maximum volume settings for the input you are using. Press the multifunction button labeled Setup
on the screen, then press the Default button.
For more information
Your Altair II preamplifier should give you many years of trouble-free, maintenance-free service. If you
encounter any problems you cannot solve or have technical questions, please contact your
Constellation Audio dealer.
For more information about Constellation Audio products, please visit our website:
www.constellationaudio.com