COMTEK PR-216 76-88 - Manual (Page 3)

n
AUDIO OUTPUT JACK: This stereo 3.5 mm audio output jack accommodates
any low impedance headphone — either stereo or mono; also, charging input for
rechargeable battery, and auxiliary power input.
o
VOLUME CONTROL: This control has 50 dB of range to adjust the audio
output for a comfortable listening level (clockwise for maximum level).
p
POWER / RECEIVER STATUS INDICATOR:
The LED test indicator displays three functions:
1. The indicator will illuminate continuously
when unit is “ON” and NO signal is being
received.
2.
A steady slow flash indicates the receiver
is receiving a signal on the tuned channel.
3.
A rapid flash of the LED indicator and a
subtle beeping signal indicates a low battery.
q
ON / OFF SWITCH: This switch turns the
receiver on and off.
r
TV 5 OR 6 SWITCH: This switch
determines the band of the receiver.
Set to the left for TV 5 band
(76 MHz-82 MHz). Set to the
right for TV 6 band
(82 MHz-88 MHz).
s
CHANNEL SWITCHES:
These rotary switches select the
channel. Channel must be the
same as transmitter’s channel.
(See page 6 for frequency selection chart.)
t
BATTERY COMPARTMENT: The battery
compartment features a hinged battery cover and
an alignment system that ensures proper battery
polarity. Battery installation and removal is facilitated by
simply manipulating the rear of the battery.
PR-216 / TV 5-6 CONTROLS
Page 2
Battery
Cover Latch