ClearCube PCoIP Device and Firmware Compatibility Guide - Manual (Page 5)

PCoIP Device and Firmware Compatibility Guide
2 Rev K 1.10.04.08.2014 ClearCube Technology, Inc.
2.2 Zero Clients and Host Cards
The table below shows zero clients and supported host cards, where
 
indicates that a host card and a zero client are compatible, and
 
indicates that a host card and a zero client are not compatible.
In the models below, n is a digit of the model number. For example, CD76nn could be CD7622 or CD7624.
Model V5120 V5140 V5220 V5240 V5320 V5340 V5420 V5422 V5430 V5442
CD76nn
         
CD77nn
CD78nn
CD95nn
CD96nn
CD97nn
CD98nn
I942n
         
C74nn
I9440
         
2.3 Host Cards and Firmware
See the following notes for information about firmware compatibility and recommended pairings.
Host Card COMM Firmware TERA Firmware
V5442 Not applicable 4.0.3 and higher
V5430 Not applicable 4.1.0 and higher
V5422 Not applicable 4.0.3 and higher
V5420 Not applicable 4.1.0 and higher
V5340 0.4.22 and higher
Any compatible with COMM firmware on device up to 3.5.1
(see Notes)
V5320 Not applicable 3.5 and higher (but not with 4.0.3)
V5240 0.4.17 and higher
Any compatible with COMM firmware on device up to 3.5.1
(see Notes)
V5220 Not applicable 2.3 and higher (but not with 4.0.3) (see Notes)
V5140 0.4.11 and higher
Any compatible with COMM firmware on device up to 3.5.1
(see Notes)
V5120 Not applicable Any (except for 4.0.3) (see Notes)
NOTES:

ClearCube strongly recommends using the same COMM version on the host and client, and the
same TERA version on the host and the client.

Ensure that you use compatible COMM and TERA firmware. See “2.6 TERA and COMM Firmware ” on
page 4 for a list of TERA and COMM pairings that ClearCube recommends. (Continued below)