Master innovation – Clearaudio MASTER INNOVATION User Manual
Page 8
Master Innovation
User manual (set-up)
Page 8
Clearaudio Electronic GmbH 2014
Carton 1 of 3:
1)
First, take out the three black flat pads from the accessory bag. Place these flat pads on your
hi-fi rack or another suitable base, where the final position of your Master Innovation
turntable will be.
2)
Then take the Master Innovation turntable body (drive unit) from the next packaging layer
and place the turntable’s spikes onto the flat pads.
3)
To avoid humming noises it may be necessary to ground the bearing. To do so, plug the
ground cable provided into the hole in the bearing fixing bolt on the underside of the
turntable.
4)
Remove the protective security tape from the bearing housing. Place two drops of synthetic
bearing oil onto the ceramic bearing shaft (provided, and also available at
Image 2: Master Innovation drive unit
Image 3: Grounding the bearing