Blaupunkt DAKOTA RCR 127 - Manual (Page 17)

33
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Specifications
Amplifier
Output power: 4 x 23 W RMS power
acc. to DIN 45324 at
14.4 V
4 x 35 W max. power
Tuner
Wavebands:
FM
: 87.5 – 108 MHz
FM sensitivity: 1.0 µ V at 26 dB
signal-to-noise ratio
FM frequency response:
35 - 16 000 Hz
Tape player
Frequency response:
40 - 15 000 Hz
LO/DX To adjust the seek tuning
sensitivity for local or distant
stations.
LO - local stations
LO 1 - high sensitivity
LO 3 - normal sensitivity
DX - distant stations
DX 1 - high sensitivity
DX 3 - normal sensitivity
To quit the DSC programming mode
and store the adjustment:
•
Press DSC.
The DSC programming mode will be auto-
matically quit 8 seconds after having made
the last adjustment.
Overview of DSC factory set-
tings
REG OFF
RM OFF
READ KC -
LEARN KC -
LED ON
BEEP 4
TA VOL 35
LOUDNESS 3
STEREO
DX 1
TA VOL To adjust the traffic an-
nouncement and beep tone
volume from between 0 to
63.
The message will then come
through at this volume, if the
volume adjusted for the pro-
gram is lower.
If the program volume is
higher than the TA VOL lev-
el, the traffic report will be
played slightly louder.
LOUDNESS When listening at a low lev-
el, the Loudness function
creates a more natural
sound by boosting the low
frequency range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
STEREO/MONO
You can select between
stereo or mono sound.
Subject to modifications!
Dakota RCR127 gb® 02.05.2002, 10:26 Uhr 33