beautypg.com

Stopper / strobe - channel 6, Dimmer - channel 7, Linear frost - channel 8 – Clay Paky ALPHA WASH TH (C61080) User Manual

Page 29: Operation with option rain off

background image

29

Continua / Continue

• STOPPER / STROBE - channel 6

BIT

%

EFFECT

0 - 3

0.0 - 1.2

CLOSED

4

1.7

SLOW STROBE (1 flash/sec)

MA

CR

O

103

40.5

FAST STROBE (12 flash/sec)

104 - 107

41.0 - 42.0

OPEN

108

42.5

SLOW PULSATION

207

81.2

FAST PULSATION

213 - 225

83.7 - 88.2

RANDOM SLOW STROBE

226 - 238

88.7 - 93.2

RANDOM MEDIUM STROBE

239 - 251

93.7 - 98.2

RANDOM FAST STROBE

252 - 255

98.7 - 100

OPEN

208 - 212

81.7 - 83.2

OPEN

BIT

%

EFFECT

255

100

COLOUR EXCLUDED

0

0.0

COLOUR INSERTED

CHANNEL 1

CYAN

CHANNEL 2

MAGENTA

CHANNEL 3

YELLOW

BIT

%

EFFECT

255

100

COLOUR INSERTED

0

0.0

COLOUR EXCLUDED

CHANNEL 1

CYAN

CHANNEL 2

MAGENTA

CHANNEL 3

YELLOW

• COLOUR MIXING - channel 1 - 2 - 3

Operation with option CMY Off

Operation with option CMY On

• C.T.O. - channel 4

BIT

%

EFFECT

0

0.0

FILTER EXCLUDED

255

100

FILTER INSERTED

• DIMMER - channel 7

BIT

%

EFFECT

255

100

DIMMER OPEN

0

0.0

DIMMER CLOSED

• LINEAR FROST - channel 8

BIT

%

EFFECT

255

100

FROST INSERTED

0

0.0

FROST EXCLUDED

• COLOUR WHEEL - channel 5

Operation with option Rain On

255

100

FAST ROTATION (200 rpm)

128

50.0

SLOW ROTATION (0,2 rpm)

75 - 99

29.5 - 38.7

COLOUR 3

25 - 49

9.7 - 19.0

SATURATED RED

0 - 24

0.0 - 9.5

WHITE

50 - 74

19.5 - 29.0

BLUE CONGO

100 - 127

39.0 - 49.7

COLOUR 4

BIT

%

EFFECT

Operation with option Rain Off

153 - 203

60.0 - 79.5

COLOUR 3

51 - 101

20.0 - 39.5

SATURATED RED

0 - 50

0.0 - 19.5

WHITE

102 - 152

40.0 - 59.5

BLUE CONGO

204 - 255

80.0 - 100

COLOUR 4

BIT

%

EFFECT

IMPORTANT: The lamp dim to half power 3 seconds after
the channel stay at 0% level. The lamp goes back to full
power when the channel level is put higher than 0%.

IMPORTANT: The lamp dim to half power 3 seconds after
the channel stay at 0% level. The lamp goes back to full
power when the channel level is put higher than 0%.