Clay Paky A.LEDA B-EYE K20 CC (C61421) - Manual (Page 9)

9 A.LEDA B-EYE CC
Continue ➔
SPECIAL FUNCTIONS
Pan / Tilt speed
Lets you select two different Pan and Tilt speeds.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Normal
- Fast
3) Press F to confirm the selection or LEFT D to keep current
settings.
Dimmer Curve
Lets you select four different Dimmer channel curves.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Curve 1
- Curve 2
- Curve 3
- Curve 4
3) Press F to confirm the selection or LEFT D to keep current settings.
RGB Gamma
Lets you select three different RGBW gamma curves.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Gamma 1.0
- Gamma 1.5
- Gamma 2.0
3) Press F to confirm the selection or LEFT D to keep current settings.
Halogen Mode
Lets you select five different halogen lamp simulations.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Halogen OFF
- Halogen Lamp 1
- Halogen Lamp 2
- Halogen Lamp 3
- Halogen Lamp 4
- Halogen Lamp 5
3) Press F to confirm the selection or LEFT D to keep current settings.
SETTING
Used to save 3 different settings of the items in the options menu and
relative submenus.
1) Press
F - “Default preset” appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
configurations:
- Default preset (*)
- User preset 1
- User preset 2
- User Preset 3
3) Press F - “Load preset X” appears on the display.
4) Use the UP B and DOWN C keys to select:
- Load preset X to recall a previously stored configuration.
- Save to preset X to store the current configuration.
a confirmation message (Are you sure?) appears on the display.
5) Select YES to confirm the selection or NO to keep the current setting
and return to the next higher level.
(*) DEFAULT PRESET
Used for restoring default values on all options menu items and relevant
submenus.
1) Press
F , a confirmation message (Are you sure?) appears on the display.
2) Select YES to confirm the selction or NO to keep current setting.
OPTION
DEFAULT
Invert Pan Off
Invert Tilt Off
Swap Pan-Tilt Off
Encoder Pan-Tilt On
Silent Mode Standard
Display Off
Pan/Tilt speed Fast
Dimmer Curve Curve 1
RGB Gamma Gamma 1.5
Halogen Mode Halogen OFF
Save To
Preset 3
Reset To
Dafault
Go Back
Setting
Default
Preset
Load
Preset 1
Save To
Preset 1
User
Preset 1
Load
Preset 2
Save To
Preset 2
User
Preset 2
Load
Preset 3
User
Preset 3
RGB
Gamma
Dimmer
Curve
Halogen
Mode
Special
Functions
Pan / Tilt
speed