Calculated Industries 8416 - Manual (Page 28)

Convert Decimal Degree to
D:M:S
Enter 38.59° and convert it to D:M:S format.
Steps/Keystrokes Display
1. Clear calculator:
[On/C] [On/C] 0.
2. Enter 38.59°:
38.59 [d:m:s] 38.59°
3. Convert to D:M:S:
[d:m:s]
DMS
38:35:24
D MIN
SEC
Using the Triangulation
Function
Triangulation solutions are easy when using
NautiCalc Plus.
By entering your course,
bearings and the distance traveled between
bearings, you can determine the distance
from the object and the distance Abeam.
Course and bearings 1 and 2 may be
entered as either decimal degrees or as
degree:minute:seconds. The value for
“Course” can be entered by entering the
value and pressing
[Course°] . The value
is permanent until revised or [Conv] [x]
is pressed to perform an “All Clear.”
The distance from the bearing object can
be found by pressing the
[Dist] key twice
28 –NautiCalc Plus ™