Calculated Industries 43285 - Manual (Page 47)

Calculator Information
The following default settings are built in to this calculator.
Performing an All-Clear — [Set] [x] — will return your calculator
to these original settings.
• 12 Periods per Year • Month Offset of January (1)
• Two Fixed Decimal Places • ARM Ratios = 1.00 : 1.00
• Qual 1 Ratios = 28% : 36% • CAP = “0”
• Qual 2 Ratios = 29% : 41% • Pro-Mode “Off”
Error Codes
With an incorrect entry or answer beyond the range of the calcu-
lator, the display will show “Error” followed by one-digit numer-
ic code. To clear an error, simply press any key.
Error 1 Number Too Large to Display
Error 2 Attempted to Divide by Zero
Error 3 Time Value of Money Error
Error 4 Invalid Entry
Error 5 Invalid Entry Type
Error 6 Bi-Weekly Error
Error 7 Qualifying Error
Tilt-Up Display
Your calculator is designed with a special “tilt-up” display that you
may move to three different positions for the best viewing angle.
Auto Shut-Off
Your calculator is designed to shut itself off after about 8-12 min-
utes of non-use.
A
PPENDIX
46 – Qualifier Plus ® IIx DT