Calculated Industries 3302 - Manual (Page 19)

8VHU·V *XLGH ³
Note: Area and volume measurements can
also be calculated by entering values manu-
ally into [Length], [Width] and [Height].
Large Room Measurements
If you want to measure a room beyond the 60-foot
range, take two linear measurements. Stand in the
center of the room and take one measurement in
one direction. Turn around and take a second
measurement in the opposite direction. Follow the
directions below to add both measurements to the
cumulative memory:
1. Pick a point in the center of the room. In one
direction, take the first measurement towards the
wall. When the measurement is displayed, press
[M+].
2. In the opposite direction, take the second
measurement to the opposite wall. When the
measurement is displayed, press [M+].
3. Press [Rcl] [M+] to display the cumulative
total that has been stored in Memory.