Calculated Industries 8020 - Manual (Page 16)

P
OCKET
R
EFERENCE
G
UIDE
— 15
PREFERENCE FEATURE
The Ultra Measure Master provides
Preference Settings that allow you to set
fractional accuracy and display features.
The preference settings are displayed
using
® / . Repeated presses of / tog-
gle through the different settings while the
+ and – keys are used for revision.
These settings remain set until they are
changed or the calculator is reset.
FRACTIONAL ACCURACY SETTINGS
• Fraction Set to 1/64” (Default)
• Fraction Set to 1/2”
• Fraction Set to 1/4”
• Fraction Set to 1/8”
• Fraction Set to 1/16”
• Fraction Set to 1/32”
FRACTION MODES
• Normal Mode (Default)
• Fixed Mode
EXPONENT
• On (Default)
• Off
FLASHING FRACTION
• Off (Default)
• On
Whenever the fractional setting is other
than 1/64 normal mode, a star (
★ ) will
appear in the bottom left of the display
when the calculator is turned on. This indi-
cates a special fractional setting is stored
within.