Calculated Industries 4050-F - Manual (Page 13)

P
OCKET
R
EFERENCE
G
UIDE
— 9
Ç √
x 2 — Squares a linear or
non-dimensional value.
Ç •
Total Cost — Based on
entry of per unit cost.
Ç 0
Store Weight per Volume
— Stores a new Weight per
Volume value as listed
below:
Note: After entering a value and
pressing Ç 0, continue
pressing the 0 digit key until
you’ve reached the desired
Weight per Volume format. To
recall your setting, press ® 0.
• Ton Per CU YD
• LB Per CU YD
• LB Per CU FEET
• MET Ton Per CU M
• kG Per CU M
This value is stored until
you change it or perform a
Clear All (Ç x).
Ç 5
On-Center Spacing (o.c.)
— Stores a new on-center
spacing (e.g., 2 4 i
Ç 5
). The value is used
for jack and rake wall stud
calculations. Default is 16”.