Calculated Industries 4050 - Manual (Page 13)

P
OCKET
R
EFERENCE
G
UIDE
— 9
Ç √ x 2 — Squares the value in
the display.
√ Square Root Key — Used
to find the Square Root of a
non-dimensional or area
value.
Ç • Total Cost — Based on
entry of per unit cost.
Ç 0 Store Weight per Volume
— Stores a new
Weight per
Volume value as listed
below:
Note: After entering a value
and pressing
Ç 0 , continue
pressing the 0 digit key until
you’ve reached the desired
Weight per Volume format. To
recall your setting, press
® 0 .
• Ton Per CU YD
• LB Per CU YD
• LB Per CU FEET
• MET Ton Per CU M
• kG Per CU M
This value is stored until
you change it or perform a
Clear All (
Ç x ).
Ç 5 On-Center Spacing (o.c.)
— Stores a new on-center
spacing (e.g.,
2 4 i
Ç 5 ). The value is used
for jack and rake wall stud
calculations. Default is 16”.