Calculated Industries 4050 Metric Edition - Manual (Page 15)

P
ocket
R
efeRence
G
uide
— 12
Entering Square/Cubic dimensions
Examples of entering Square and Cubic
dimensions:
KEYSTROKE dISplAY
oo
0.
Enter numeric value and press desired unit
key once to label value as “Linear:”
KEYSTROKE dISplAY
oo
0.
100M
100
MM
Enter numeric value and press desired unit
key twice to label value as “Square:”
KEYSTROKE dISplAY
oo
0.
100MM
100
SQ MM
Enter numeric value and press desired unit
key three times to label value as “Cubic:”
KEYSTROKE dISplAY
oo
0.
100MMM
100
CU MM
Note: If you pass the desired dimensional format,
keep on pressing the dimensional unit key until the
desired result is displayed again.
BASIC MATH OPERATIONS
Your calculator uses standard chaining logic,
which simply means that you enter your
first value, the operator (+, -, x, *), the
second value and then the Equals sign (=).
A.
3 + 2 =
5.
b.
3 - 2 =
1.
C.
3 x 2 =
6.
d.
3 * 2 =
1.5
This feature also makes the calculator simple
to use for dimensional applications.
USING ThE
CONSTRUCTION MASTER ® 5
ADDING AND SuBTRACTING
STRINGS OF DIMENSIONS
Add the following measurements:
• 850 mm
• 1.2 m
• 600 mm
Then subtract 175 mm.
KEYSTROKE dISplAY
850M+
850.
MM
1.2m+
2050.
MM
600M=
2650.
MM
-175M=
2475.
MM
PRG4050E-A.indd 12 5/24/2013 2:14:07 PM