BSA Optics TW4X30 - Manual (Page 7)

7
6.) TROUBLE SHOOTING TIPS:
Inaccuracy Issues:
1). First check your mount. Using your bare hands only, softly twist the scope
in the rings, check for any movement. If there is any movement, re-tighten
the mounts. Non-permanent thread lock tight is recommended.
2). Use a bench rest or sandbag to support the forearm and butt stock when
making windage and elevation adjustments. This will help eliminate
movement.
3). Always follow through with every shot.
4). Always use the ammunition of the same bullet type and weight.
5). Check that your rifle is properly bedded in the stock. A loose stock can
create changes to the point of impact.
6). Check that your barrel and chamber are clean. Damaged rifling or
excessive grease can cause inaccuracy.
7). Always make adjustments in small increments to avoid moving the
erector tube.
For questions on our products and for complete instructions on warranty
and repair, contact BSA Optics Customer Service at (954) 581-2144 or visit
bsaoptics.com
FOR RETURNING PRODUCTS
Return products following the warranty guidelines.
A brief description is included below.
1). Remove any accessories and rings.
2). Include a note with a brief description of the problem, address,
telephone number, and email address.
3). A $10 check for return shipping and processing fees and
proof of purchase.
4). We recommend using a shipping method with a tracking
number (Fedex,UPS ect.).
BSA optics cannot be held liable for lost or damaged items.
*PLEASE NOTE: if your product is not registered you must have proof of
original purchase, or you will be subject to repair fees (see warranty).
SHIP PRODUCTS TO:
BSA Optics Inc.
1475 S. Sam Houston Blvd.
Houston, MO 65483