Brinno MAS100 - Manual (Page 5)

Installation
03- MAS100
Indoor Indoor Outdoor Outdoor
-a -b
1
3 3
2
1. Install Holder and tightening the screw.
2. Tear off the cover of double-sided glue.
3. Place your Motion Activated Sensor(MAS100) on our suggestion location:
a. Place on ceiling above the porch and face to ground.
b. Place above door, and adjust the Motion Activated Sensor angle, face to ground.
D
1*
A
1*
D
2*
D 1 : Detected distance: 5 meters
D 2 : Signal received distance: 5 meters
A 1 : Detected angle: 60°
Note