Brinno TLC200 Pro - Manual (Page 25)

25
Timer
Basic settings
The Timer will allow you to pre-set a recording pe-
riod. ( eg. 8 am – 5 pm )
1. Set the start recording time (A area), then set the stop
recording time (B area). The time is set in 15 minutes incre-
ments. Press MENU to lower the number, press TIME to
increase the number and press OK to next column.
Or you may select Cancel to disable Timer setting.
Setting
Timer
OK
Timer
0000-0000
Exit
Cancel
OK
1 2
Timer
OK : Next
0000 - 0000
3
0000 - 0000
A B
e.g.
0600 - 1600
1600 - 2330
2345 - 0500
morning to afternoon
afternoon to night
overnight
2. After setting up the time, go back to the set up screen
then press the OK button to move to the preview screen.
Hold the OK button for 2 seconds to start recording. The
LCD panel will show REC then turn off to save power. The
camera will automatically activate at the start recording
time you selected.
T.Lapse
1 Sec
2013/03/01
22:58:32
OK
2 sec.
Set up screen
•
REC READY
Preview screen Recording Recording period
ONCE YOU ACTIVATE TIMER, YOUR TIME LAPSE CAMERA
WILL ONLY WORK AT THE TIMER SETTING PERIOD.