How to setup your timelapse camera, Front view back view – Brinno TLC100 User Manual
Page 4
1. Remove the TimeLapse Camera from the package.
2. Check to make sure that all the contents are included.
3. Open up the TimeLapse Camera by placing it Lens side down on a flat surface, or Lens side down in the
palm of your hand, and remove the battery door by pulling open the latch.
4. Insert four AA batteries according to the polarity direction (+ -).
5. Insert any standard USB Flash Drive into the TimeLapse Camera in the open slot between the
batteries.
Front view
Back view
Lens
Power button
Macro Image
Battery cover
USB Flash drive
Wheel
Standard Image
Mounting Hole
AA battery
How to setup your TimeLapse Camera
Brinno TimeLapse Camera
- 2