Hotpoint Ariston CE 6V P6 EU/HA - Manual (Page 21)

GB
21
* Only available in certain models.
Planning cooking with the analogue
programmer*
Programming cooking time with immediate start
1. Turn the PROGRAMMER knob in an anticlockwise
direction until the desired cooking time is displayed.
2. Pull the PROGRAMMER knob and turn it in an
anticlockwise direction until the marker corresponds
with the current time. A click will indicate the end of
the programming phase.
3. Select the desired cooking mode using the
SELECTOR knob. The oven switches on immediately
and remains on for the entire duration of the set
cooking time.
4. When the set time has elapsed, a buzzer will sound.
To stop the process, turn the PROGRAMMER knob in
an anticlockwise direction until the symbol “9” is
displayed.
5. Turn the SELECTOR knob to the “0” position.
• For example: it is 9:00 a.m. and a time of 1 hour
and 15 minutes is programmed. The programme
will stop automatically at 10:15 a.m.
Programming a delayed cooking time
1. Turn the PROGRAMMER knob in an anticlockwise
direction until the desired cooking time is displayed.
2. Pull the PROGRAMMER knob and turn it in an
anticlockwise direction until the marker corresponds
with the desired cooking start time.
3. Select the desired cooking mode using the
SELECTOR knob. The oven will switch on at the set
cooking start time and will remain on for the entire
duration of the set cooking time.
4. When the set time has elapsed, a buzzer will sound.
To stop the process, turn the PROGRAMMER knob in
an anticlockwise direction until the symbol “9” is
displayed.
5. Turn the SELECTOR knob to the “0” position.
• For example: it is 9:00 a.m., a time of 1 hour and 15
minutes is programmed and the start time is set to
11:00 a.m. The programme will start automatically
at 11:00 and will end at 12:15.
To cancel programming, turn the PROGRAMMER
knob anticlockwise until the symbol “9” is displayed.
At this point, the oven is programmed to switch on
automatically at 12:30 and switch off after 30 minutes,
at 13.00.
Setting the cooking time with an immediate start
Follow the above procedure for setting the cooking
time (points 1-3).
When the letter A appears, this indicates that both the
cooking time and the end cooking time have been
programmed in AUTO mode. To restore the oven to
manual operation, after each AUTO cooking mode
press the COOKING TIME $ and END COOKING
TIME % buttons simultaneously.
The symbol m
will remain lit, along with the oven, for
the entire duration of the cooking programme.
The set cooking duration can be displayed at any time
by pressing the COOKING TIME button $ , and the
cooking end time may be displayed by pressing the
END COOKING TIME button % . When the cooking
time has elapsed a buzzer sounds. To stop it, press
any button apart from the * and ) buttons.
Cancelling a previously set cooking programme
Press the COOKING TIME button $ and the
COOKING END TIME % simultaneously.
Correcting or cancelling previously set data
The data entered can be changed at any time by
pressing the corresponding button (TIMER, COOKING
TIME or COOKING END TIME) and the * or )
button.
When the cooking time data is cancelled, the cooking
end time data is also cancelled automatically, and
vice versa.
If the oven has already been programmed, it will not
accept cooking end times which are before the start of
the programmed cooking process.