BLUESHAPE BUBBLEPACK - Manual (Page 3)

3
Package contents
• Bubblepack 65Wh battery
• Camera Adapter base
• Battery charger with mains cable
• BSTAP connector with 50cm cable
• Operating manual
Introduction
Bubblepack is a universal 65Wh, battery pack with multiple voltage
outputs.
The device is intended for fixing underneath a camera to supply
power to it and its accessories. The whole arrangement can also be
mounted on a tripod if needed.
Outputs Range Connection Designation
14.8V /7A max 12.6V min ~ 16.8V max 2 x D-TAP HIGH
11.2V /5A max selected by switch 2 x BSTAP* LOW
8.4V /5A max selected by switch 2 x BSTAP* LOW
All LOW outputs are regulated
*BSTAP is a custom BLUESHAPE connector (blue)
Features
• Sturdy mechanical design
• Detachable (sliding) adapter with spring loaded, dual hooking
mechanism
• Lever arm for tight, low tolerance locking of adapter base to rail,
ensuring shake-free operation during shooting
• Adjustable positioning of adapter base on rail for achievement
of optimum camera balance
• Super compact, high energy density and lightweight assembly
• Stylish external looks
• Can be mounted on a standard tripod
• Choice of 3 voltage outputs @ high current
• Choice of 4 output connectors (2 x D-TAP, 2 x BSTAP)
• Comprehensive electrical safety/ energy saving features
• Full short-circuit /overload protection
• Convenient, 4 LED voltage based gas gauge
• High efficiency Li-ion battery charger included
• Can power a wide range of cameras using special accessories
(available extra) such as cables and battery eliminators. Please
visit
www.blueshape.net for more information.