Blomberg TKF 7431 A - Manual (Page 57)

57 EN
Auxiliary function
Audio Warning
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Your dryer will give an audio warning when the
programme comes to an end. If you do not
want to hear this buzzing or want to change
the volume level, you need to press the
“Volume level” button. No audio warning will be
given when “x” appears on the screen.
C
You can select this function either before or
after the programme starts.
Drying degree
Used to adjust the required dryness level. More
drying is performed compared to the default
settings when “+” sign appears and less
drying is performed when “-” sign appears.
Programme duration can change depending
on the selection.
A
This function must be selected before the
programme starts.
Anti-creasing
A 2-hour anti creasing programme to prevent
laundry from creasing will be activated if
you do not take the laundry out after the
programme is over. This programme rotates
the laundry in 600-second intervals to prevent
creasing. Press “Anti-creasing” button to
activate.
Anti-creasing is activated but the programme
is running in the first exemplary figure. Drying
is over and the first step of anti-creasing has
started in the second figure.
Changing the contrast
Contrast can be adjusted in order to make
the symbols on the display appear clearer. It
may particularly be necessary to change the
contrast setting of the display when the dryer
is installed over a washing machine.press and
Press and hold the Spin Speed/Time button
for 3 seconds.
When the contrast is changed at the end of
3 seconds, all symbols on the display will
become visible for 3 seconds in order to
indicate that the process is complete.
Perform the same procedure to revert back to
the previous contrast setting.
Warning indicators
C
Warning indicators may differ according to
the model of your machine.
Filter cleaning
A warning symbol will appear to remind filter
cleaning after the programme finishes.
C
If the filter cleaning symbol flashes
continuously, please refer to “Suggested
solutions for problems”.
Water tank
A warning symbol will turn on at the end of
the programme or when the tank is full with
water. The machine stops operating if the
warning symbol turns on when a programme
is running. To restart the machine, please
drain the water in the water tank. Press “Start/
Pause/Cancel” button to start the programme
after you have emptied the water tank. The
warning symbol turns off and the programme
resumes operating.
Cleaning the condenser
Warning symbol turns on with certain intervals
to remind that the condenser needs cleaning.
Door open
Dryer door open symbol lights up.