Disposing of packaging material, Transportation of the product a, Disposing of the old product – Blomberg GSN 9582 A7 User Manual
Page 11
10 EN
detergent while the machine is
empty. During the initial use, fill the
salt reservoir with 1 litre of water
prior to filling it with salt.
C
Some water might have remained
in the product due to the
quality control processes in the
production. It is not harmful for the
product.
Disposing of packaging
material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place away from reach of the
children.
Packaging materials of the product
are manufactured from recyclable
materials. Dispose of them properly
and sort in accordance with recycled
waste instructions. Do not dispose of
them with normal domestic waste.
Transportation of the product
A
If you need to move the product, do
it in upright position and hold from
the rear side. Slanting the product
onto its front side may cause the
electronic parts in it get wet and
damaged.
1. Unplug the product before
transporting it.
2. Remove water drainage and water
supply connections.
3. Drain the remaining water in the
product completely.
Disposing of the old
product
Dispose of the old product in
an environmentally friendly
manner. Some parts of the product
are manufactured from recyclable
materials. Along with a recycling
symbol, information about its nature
(PE, PS, POM, etc) is also provided on
the material. These materials should
not be disposed as normal domestic
wastes.
Refer to your local dealer or solid
waste collection centre in your area to
learn how to dispose of your product.
A
For children's safety, cut the
power cable and break the locking
mechanism of the door so that
it will be non-functional before
disposing of the product.