Blomberg GSN 9583 XB630 - Manual (Page 34)

33 EN
3. “Settings Menu...X” appears on
display. X denotes the time in
seconds you need to keep the key
pressed.
4. After entering into the “Settings”
menu, press Function key to switch
between the main menus. You will
switch to the next main menu with
each press of the key. If you press
the Function key again when you are
in last main menu, you will return to
the first main menu.
5. Press > or < Selection keys to make
changes in the submenus.
6. Press Confirmation key to store your
changes in the submenu.
7. “Stored!” will be displayed after you
press the Confirmation key.
8. If you press Function key without
making any changes in the
submenu, you will switch to the next
setting menu.
9. Select “Back to Prog. Menu” and
press Confirmation key to exit the
“Settings” menu.
Time Delay and Start / Pause
/ Cancel keys do not have any
function in “Settings” menu. Pressing
these keys has no effect.
Language
“Language” menu contains 10 different
language options in total.
Brightness
You can adjust screen brightness to a
level between 1 - 3.
Contrast
You can adjust screen contrast to a
level between 1 - 3.
Auto Door Open
When you enable this function,
the door of your machine will open
automatically at the end of the
programme. Thus, the drying efficiency
is increased and energy saving is
provided. There are two options,
namely “On” and “Off”. It is set to “On”
at factory.
Your machine gives an audio
warning before Auto Door Open
function runs. And the door of your
machine opens automatically within
2 minutes. The lock mechanism
prevents the door from being
closed for the next 1 minute. Do
not try to close the door during this
period.
Do not unload your machine for 30
minutes after the door is opened
automatically. Thus, you will obtain
a better drying performance.
Do not stand in front of the door in
order not to hinder the door when
you hear the door opening signal.
To cancel the Auto Door Open
function:
1. Press On / Off key to turn on your
machine.
2. Press Function and Time Delay
keys together for 3 seconds.
3. “Settings Menu...X” appears on
display. X denotes the time in
seconds you need to keep the key
pressed.
4. After entering in the “Settings”
menu, press Function key until