Blizzard Lighting WallFlower (Rev A) User Manual
Wallflower, Getting started, Safety instructions
![background image](/manuals/584237/1/background.png)
Copyright © 2013 Blizzard Lighting, LL
C
www.blizzardlighting.com
PRODUCT LIMITED WARRANTY
Blizzard Lighting,
LLC
hereby w
arr
ants
that its products shall
be free of manufacturing defects in material and
workmanship for a prescribed period from the date of
purchase (see
specific w
arrant
y period below). This
warr
anty shall be v
alid only if the product is
purchased
within the
United States of
America, including
posses-
sions and territories. This w
arrant
y shall be valid
only if the product is
purchased
from an authoriz
ed dealer
appointed by
Blizzard Lighting, LL
C. It
is the owner’s
responsibility
to establish the
date and place of purchase
by a
cceptable evidence.
For
warr
anty service
you must
obtain a Return
Authorization
number (RA
#) before sending back the product.
Contact Blizzard Lighting,
LLC’
s Service D
epartment at [email protected].
Send the product
only to
the Blizzard Lighting,
LLC f
actory. A
ll shipping cha
rges must be prepaid. If the requested
repairs or service (in
-
cluding parts replacement) are within the
terms of
this warr
anty, B
lizzard Lighting, LL
C will pa
y return shipping
charges only
to a designated point
within the United States.
If the entire instrument
is sent, it must be
shipped
in its original package. No
accessories should be shipped with the product.
If an
y accessories
are shipped
with
the product, Blizzard
Lighting, LLC shall ha
ve no
liability
whatsoever
for loss
of or
damage to an
y such acces
-
sories, nor f
or the safe return
thereof.
This warr
anty is v
oid if the serial number has
been altered or remo
ved; if
the product is modified
in an
y man-
ner which B
lizzard Lighting, LLC concludes,
after inspection, af
fects the reliability
of the
product; if the
product
has been repaired or serviced
by a
nyone other than the
Blizzard Lighting,
LLC
factory unless prior written au
-
thorization w
as issued to
purchaser
by Blizza
rd Lighting, LL
C; if the product is
damaged because
not properly
maintained as
set forth in the instruction manual.
This is not a
service contr
act, and
this warr
ant
y does not include maintenance, cleaning
or periodic check
-up.
During the
period specified above,
Blizzard Lighting, LL
C will repla
ce defective parts at its expense with
new
or refurbished parts, and
will absorb all expenses for w
arrant
y service and repa
ir labor by
reason of def
ects in
material or
workmanship. The
sole responsibilit
y of
Blizza
rd Lighting, LL
C under
this w
arrant
y shall be
limited
to the
repair of the
product, or replacement thereof
, including pa
rts, at
the sole discretion of B
lizzard Lighting.
Blizzard Lighting,
LLC
reserves the right
to make changes in design
and/or improvements
upon its products
without any
obligation to include these changes in an
y products theretofore
manufactured.
No w
arrant
y, whether expressed or implied, is giv
en or made with respect
to any
accessory supplied with
products described above. Ex
cept to the extent
prohibited by
applicable la
w,
all implied
warr
anties made b
y
Blizzard Lighting,
LLC
in connection
with this product, including warr
anties of merchanta
bility
or fitness, are
limited in
duration to
the w
arrant
y period set f
orth abo
ve. And no
warr
anties, whether expressed or implied,
including warr
anties of
merchantability or
fitness, shall apply to
this product
after said
period has expired. The
consumer’s
and/or Dealer
’s
sole remedy
shall be such repair or
replacement as is expressly pro
vided abo
ve;
and under no circumstances shall
Blizzard Lighting, LL
C be liable for an
y loss or damage, direct or consequen
-
tial, arising
out of the
use of
, or inability to
use, this product.
This warr
anty is the only written w
arrant
y applicable to B
lizzard Lighting Products and supersedes all
prior war
-
ranties and written
descriptions of
warr
anty terms and conditions
heretofore published.
LIMITED WARRANTY PERIODS:
All LED Products: 2 years (do
es not include damage t
o LEDs caused by mishandling)
All Controller Products: 2 years
All Fog/Atmospheric Pro
ducts (Non-DMX): 90 days, (DMX): 2 years
Lasers: 2 years
Other Products no
t listed here: 90 days
REGISTER YOUR PRODUCT ONLINE AT:
BLIZZARDLIGHTING.COM
GETTING STARTED
What’s In The Box?
• 1 x WallFlower™ LED Effect
• 2x 3M Brand Mounting Squares
• This Lovely User Manual
Main Features:
• Easy to use, plug and play
• Sound active w/built-in microphone
• Power output: 8W, 48x 5mm R/G/B LED’s
• Long life: 20,000+ hours
• Working environment temperature: 32°-104° F
• Operation modes: auto + sound active modes
• Input voltage: 90V-240V AC 50-60Hz
Congratulations on your purchase of the WallFlower™ LED effect! It’s an easy to use,
beautiful LED effect that features auto and sound active modes. So, now that you’ve got
your WallFlower™ (or hopefully, WallFlowers!), you should carefully unpack it and make
sure it is in good condition. If anything looks as if it has been damaged in transit, notify
the shipper immediately and keep the packing material for inspection. Again, please
save the carton and all packing materials. If a fixture must be returned to the factory, it
is important that the fixture be returned in the original factory box and packing.
SAFETY INSTRUCTIONS
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture.
• Maximum ambient temperature is 104°F (40°C). Do not operate fixture at higher
temperatures.
• Never try to repair the unit by yourself. Repairs carried out by unskilled people can
lead to damage or malfunction.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
CAUTION! There are no user serviceable parts inside the unit. Do not open the housing
or attempt any repairs yourself.
If something is wrong, just give us a call or send an email.
We’ll be happy to help, honest.
[email protected] - www.blizzardlighting.com
866.493.6025 | 414.395.8365 | FAX: 866.870.0031
WallFlower
TM
USAGE INSTRUCTIONS
Powering It Up!
The WallFlower is a great little plug and play effect light fitted with 48x 5mm R/G/B
LED’s, and only uses a tiny 8-watts of power while giving off an impressive color chasing
display in multiple patterns. Just plug it in and watch it go!
OPERATING MODES
Auto and Sound Active Modes
In auto mode, the WallFlower™ will automatically run through all of its various built-in
programs. In sound active mode, it will use its built-in microphone to switch programs
to the beat of music. To switch between auto and sound active modes, you will need to
insert a non-metallic object, such as wood or plastic, into the hole found on the top
of the unit to push the mode switch button found within:
Mounting
Holes
AC Power
Cord
Mode Switch Button
WARNING - Do not use any type of
electrically conductive metallic object to
push the mode switch button. It is possible
that you may accidentally short out or
damage internal components. Use a non-
metallic object such as wood or plastic!
Mounting:
On the back side, the WallFlower™
has two mounting holes that are
designed to slide and lock onto the
head of a standard flat-head screw.
And for your convenience, 2x double
sided mounting tape squares are
also included.
Tuck the power cord into the slot on
the back of the unit before mounting
the fixture onto a flat surface/wall.