Blizzard Lighting Fab5 ToughPAR (Rev A) - Manual (Page 16)

Page 16
The ToughPAR Fab5 (s) Manual Rev. A © 2012-13 Blizzard Lighting, LLC
• RGBW
Enables/disables RGBW color correction.
• POW
Sets the fixture in “Normal” (Low Power, 33% output) or “High” power
mode.
• DIM
Sets the 16-bit dimming curve (OFF=8-bit (standard) dimming, 1-4 are 16-
bit dimming profiles, fastest to slowest).
CAL1
Color Temperature-Based White Values
This menu option allows the user to set the fixture’s white output to one of 11
preset or user adjustable color temperatures.
Setting Color Temp Setting Color Temp Setting Color Temp
WT01 3200K WT05 5600K WT09 8000K
WT02 3400K WT06 5900K WT10 8500K
WT03 4200K WT07 6500K WT11 10000K
WT04 4900K WT08 7200K
To adjust the RGBW settings of any of these preset color temperatures, hit
and then use the and buttons to select the
desired R/G/B/W value you want to edit. Hit . Use the and
buttons to change the desired value. Then push the
button to confirm your choice and return to the previous menu option. Each
color has the adjustable values of 000 <--> 255 (0% <--> 100%).
CAL2
RGBW Based Values
This is used to setup a custom white balance using R/G/B/W values. Hit
and then use the and buttons to select the
desired R/G/B/W value you want to edit. Hit . Use the and
buttons to change the desired value. Then push the
button to confirm your choice and return to the previous menu option. Each
color has the adjustable values of 000 <--> 255 (0% <--> 100%).