Getting started, Page 3, What’s in the box – Blizzard Lighting F3 Torrent (Rev A) User Manual
Page 3: Getting it out of the box, Powering up, Getting a hold of us
![background image](/manuals/584207/3/background.png)
Page 3
Torrent F3™ Manual Rev. A
Copyright (c) 2012 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Torrent F3™ Spot
• An Ever-So-Handy Power Cord
• A Sweet Safety Cable & set of Mounting Brackets
• One really classy DMX cable
• This Lovely User Manual
Getting It Out Of The Box
On the Fujita Scale, the F3 category is considered to be an intensely fast, and high-
ly dangerous storm... today the fastest and brightest LED profile spot in its class is
the Torrent F3! Now that you’ve got your Torrent F3, you should carefully unpack
the box and check the contents to ensure that all parts are present and in good
condition. If anything looks as if it has been damaged in transit, notify the shipper
immediately and keep the packing material for inspection. Again, please save the
carton and all packing materials. If a fixture must be returned to the factory, it is
important that the fixture be returned in the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and cannot
be run off a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel is used solely for a 0% to 100%
switch.
AC Voltage Switch - Not all fixtures have a voltage select switch, so please
verify that the fixture you receive is suitable for your local power supply.
See the label on the fixture or refer to the fixture’s specifications chart for
more information. A fixture’s listed current rating is its average current
draw under normal conditions. Check the fixture or device carefully to
make sure that if a voltage selection switch exists that it is set to the cor-
rect line voltage you will use.
Warning! Verify that the voltage select switch on your unit match-
es the line voltage applied. Damage to your fixture may result if
the line voltage applied does not match the voltage indicated on
the voltage selector switch. All fixtures must be connected to cir-
cuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, just give us a call or send an email. We’ll
be happy to help, honest.
Blizzard Lighting
W220 N1531 Jericho Ct. Ste E
Waukesha, WI 53186 USA
www.blizzardlighting.com
414-395-8365
Email: [email protected]