Blizzard Lighting Q6A The Puck (Rev B) - Manual (Page 11)

Page 11
The Puck Q6A / Q6W Manual Rev. B Copyright (c) 2011-12 Blizzard Lighting, LLC
To set a custom color in Master/Slave / Standalone Mode:
Using this function, you can select any color by adjusting the Red, Green, Blue and Amber
/ White values from 0-255. You may also adjust the color balance of the fi xture.
Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this
mode.
1.) Select
NAnu
from the control panel, then hit .
2.) Choose
rEd, GrEE
,
bLuE
or
UhIT
then hit to confi rm.
3.) Using the / keys, select the color you wish to display by
varying Red/Green/Blue intensity between 0 and 255, then hit to
confi rm each color choice.
4.) Select Color preset mode as instructed above, then select
CoL 15.
then
to confi rm.
To Show the Fixture Running Hours:
1.) Select
FhrS
from the control panel, then hit to confi rm.
Stuck? Want More
Information?
Check out our
helpful tutorial video
HERE:
http://youtu.be/xVKhmV-v0jA
That should tell you everything you need to
know!