beautypg.com

Nanu, Red, gree, Blue – Blizzard Lighting Q12A The Puck (Rev C) User Manual

Page 11: Uhit, Col 15, Fhrs

background image

Page 11

The Puck Q12A / Q12W Manual Rev. C

Copyright (c) 2011-12 Blizzard Lighting, LLC

To set a custom color in Master/Slave / Standalone Mode:

Using this function, you can select any color by adjusting the Red, Green, Blue and Amber

/ White values from 0-255. You may also adjust the color balance of the fixture.

Please note that modifying the values in this step will affect ALL modes, therefore

we recommend resetting all levels to their highest value (255) after using this

mode.

1.) Select

NAnu

from the control panel, then hit .

2.) Choose

rEd, GrEE

,

bLuE

or

UhIT

then hit to confirm.

3.) Using the / keys, select the color you wish to display by

varying Red/Green/Blue intensity between 0 and 255, then hit to

confirm each color choice.

4.) Select Color preset mode as instructed above, then select

CoL 15.

then

to confirm.

To Show the Fixture Running Hours:

1.) Select

FhrS

from the control panel, then hit to confirm.

Stuck? Want More

Information?

Check out our

helpful tutorial video

HERE:

http://youtu.be/xVKhmV-v0jA

That should tell you everything you need to

know!

This manual is related to the following products: