Operating adjustments, Addr, Chnd – Blizzard Lighting RGBAW The Puck (Rev A) User Manual

Page 9: 3ch, 5ch, 12ch, Slnd, Nast, Slau, Stby, Soun

Page 9

The Puck RGBAW Manual Rev. B

4. OPERATING ADJUSTMENTS

NOTE: After making any change, the unit will return to the correct mode in about 10 seconds.

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.) The default mode for the fi xture is DMX, which appears as

Addr

on the LED

Readout. Use the button then the and buttons to

choose a channel between

and

512

. Press again to confi rm.

2.) To change between 3 and 6 channel DMX mode, select

ChNd,

then press

. Select either

3Ch, 5Ch

12Ch

, then press again

to confi rm.

Master/Slave Mode (Auto/Sound Active/Color Preset/Custom):

1.) Use standard DMX cables to daisy chain your units together via the DMX con-

nector on the rear of the units.

2.) Choose a unit to function as the Master. Select MAST. The master unit must

be the fi rst unit. Finally, chain the units together using DMX cable.

Master

SLNd

then

NASt

confi rm.

3.) Select slave function by using the / keys to reach SLAV in

the Master/Auto menu on the slave units, and they will react in the same as the

Master.

Slave

SLNd

then

SLAu

confi rm.

NOTE: When a unit is set to slave and no master is connected,

Stby

will

appear on the LED display.

4.) On the master fi xture, use the / keys to reach SHND, which

allows you to select the Master/Slave mode.

Sound active

SoUn

then to confi rm.

Auto mode

CoLo

then

Auto,

then to confi rm.

Color preset

CoLo

then

CoL 1 - CoL 31,

Color strobe

StCo

then

0-255

(Slowest <-.-> Fastest)

then

CoL 1 - CoL 31,

To set a custom color in Master/Slave / Standalone Mode:

Using this function, you can select any color by adjusting the Red, Green, Blue, Amber and

White values from 0-255. You may also adjust the color balance of the fi xture.

Please note that modifying the values in this step will affect ALL modes, therefore

we recommend resetting all levels to their highest value (255) after using this

mode.

1.) Select

NAnu

from the control panel, then hit .

2.) Choose

rEd, GrEE

bLuE, ANbE or Uhit

, then hit to

confi rm.

3.) Using the / keys, select the color you wish to display by

varying Red/Green/Blue intensity between 0 and 255, then hit to

confi rm each color choice.

4.) Select Color preset mode as instructed above, then select

CoL 15.

then

to confi rm.