Blizzard Lighting The Puck Fab5 (Rev B) - Manual (Page 3)

Page 3
The Puck™ Fab5 User Manual Rev. B Copyright (c) 2013 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Puck™ Fab5 Flat LED PAR Fixture
• 1x IEC Power Cord
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on being completely and utterly qtastic! Now that you’ve got The
Puck™ Fab5 (or hopefully, Pucks!), you should carefully unpack the box and check the
contents to ensure that all parts are present and in good condition. If anything looks as
if it has been damaged in transit, notify the shipper immediately and keep the packing
material for inspection. Again, please save the carton and all packing materials. If a
fixture must be returned to the factory, it is important that the fixture be returned in
the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and cannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that
the fixture you receive is suitable for your local power supply. See the label on the
fixture or refer to the fixture’s specifications chart for more information. A fixture’s
listed current rating is its average current draw under normal conditions. Check the
fixture or device carefully to make sure that if a voltage selection switch exists that it is
set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your fixture may result if the line voltage applied
does not match the voltage indicated on the voltage selector switch. All
fixtures must be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, just give us a call or send an email. We’ll be happy to
help, honest.
Blizzard Lighting
W220 N1531 Jericho Ct. Ste E
Waukesha, WI 53186 USA
www.blizzardlighting.com
414-395-8365
Email: [email protected]
Disclaimer: The information and specifications contained in this document are subject to change
without notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions
that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing
document or to create a new document to correct any errors or omissions at any time. You can
download the latest version of this document from www.blizzardlighting.com.
Author: Date: Last Edited: Date:
J. Thomas 11/16/2012 J. Thomas 2/12/2013