Blizzard Lighting SnowBlind (Rev A) - Manual (Page 10)

Page 10
SnowBlind™ Manual - Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
The Control Panel
All the goodies and different modes possible with the SnowBlind™ are accessed
by using the control panel on the side of the fixture. There are 4 control
buttons below the LED display which allow you to navigate through the various
control panel menus.
Is used to navigate the various modes.
Is used to enter into the selected mode setup.
Scrolls through menu items and numbers in ascending order.
Scrolls through menu items and numbers in descending order.
The Control Panel LED Display shows the menu items listed on the Control
Panel Menu Structure below. Pushing the button repeatedly will
scroll through the menu settings. To edit one, push the button.
Then use the and buttons to scroll through your choices (if
applicable). Push the mode button to confirm your choice.
Control Panel Menu Structure
CON 000 - 255
Brightness Control (Low <--> High)
F.00 - F.30
Sets the Strobe Speed (Slow <--> Fast)
SE- SE.0 - SE.9
Sound Active, Mic Sensitivity (0-9, 0=off)
*Note: The rear sensitivity knob must be turned up (clockwise) for the control panel settings will function.
Also, for the knob to function, the menu settings must not be set to off (SE.0).
SLA
Sets Fixture to Slave Mode
d-- 001 - 255
Selects the Starting DMX Channel
Mode Setup doWN up