Blizzard Lighting Puck 3 Unplugged(Rev A) User Manual

Page 11

Page 11

The Puck 3: Unplugged Manual Rev. B

USING THIS FIXTURE WITH THE wiCICLE® WIRELESS

DMX SYSTEM

In addition to the unbridled thrill you al-

ready received the fi rst time you plugged

in your fi xture, you’ll be delighted to know

that This fi xture also works seamlessly with

our wiCICLE

Wireless DMX system, without additional power.

• ONLY fi xtures bearing this logo are certifi ed for use with the wiCI-

CLE

without external power.

• Unauthorized modifi cation and/or using the wiCICLE

with

unapproved fi xtures may cause damage to the wiCICLE

fi xture. UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING

RESPONSIBLE FOR ANY DAMAGE FROM SUCH OPERATION.

• Fixtures bearing the above logo MUST only use cable and connec-

tors which separate chassis/case ground from cable shielding. Cabling

with the shield connected to the connector’s case/chassis may cause

malfunction and damage to the wiCICLE

or fi xture.

• wiCICLE

transmitters have additional power requirements

and therefore cannot be powered directly from the fi xture. You

will need to utilize the supplied AC/DC adaptor to drive wiCI-

CLE

transmitters in your system.

WE HAD THIS SPACE, SO WE FIGURED WE’D DRAW

YOU A PICTURE:

Antenna Housing & 1/2-wave

Antenna

Antenna ferrule & articulation

joint

Stainless Steel Housing

Recessed Selector Button

Status LED

3-Pin XLR Connector

(Male on transmitter, Female

on receiver model)