Blizzard Lighting 336 LED ProPar (Rev C) - Manual (Page 12)

Page 12
ProPar LED Manual Rev. C Copyright (c) 2010-12 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page #15.
1.) The ROCKLITE TRI is capable of operating with either 3 or 7 DMX channels.
To use the fi xture in 3-channel mode, use the
d001
on the LED Readout.
2.) To operate the fi xture in 7-channel mode, use the
A001
on the LED Readout.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To set the fi xture in Flash/Fade mode, select
FF01-FF99
(Fade Mode,
slowest to fastest) or
CC01-CC99
To confi rm, press the button.
2.) To use the fi xture in demo mode, select
dEoo
, then press the
button to confi rm.
3.) Each fi xture is a master by default. To set the fi xture as a slave, use the
SLAv,
then press the button to confi rm.
Sound Acitve Mode:
1.) To use sound active mode, select either
SouD
.
2.) Press the button to confi rm.
Manual Mode (Color Preset Mode):
Allows a single unit to display a variety of colors without a DMX controller.
1.) Reach the manual adjustment by using the
b001
.
Adjust each color by using the , and buttons to se-
lect
r001-r255
,
g001-g255
or
b001-b255
(Red, Green and Blue,
respectively), and adjusting between 1 (lowest) and 255 (highest) for each color.
To confi rm, press the button.