beautypg.com

Getting started, Page 3 – Blizzard Lighting Flux ProPar (Rev A) User Manual

Page 3

background image

Page 3

ProPar FLUX™ Manual Rev. A

Copyright (c) 2013 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

• 1 x ProPar FLUX™ LED MultiStrobe

• An Ever-So-Handy IEC Power Cord

• A Sweet Safety Cable & set of Mounting Brackets

• One really classy DMX cable

• This Lovely User Manual

Getting It Out Of The Box

FLUX. n. The flow of energy. In a word, that’s what you’ve now harnessed: EN-

ERGY. You wizard, you magician... YOU now command PURE, INCREDIBLE ENERGY!

Alacazam! Now that you’ve got your ProPar FLUX, you should carefully unpack the

box and check the contents to ensure that all parts are present and in good condition.

If anything looks as if it has been damaged in transit, notify the shipper immediately

and keep the packing material for inspection. Again, please save the carton and all

packing materials. If a fixture must be returned to the factory, it is important that the

fixture be returned in the original factory box and packing.

Powering Up!

All fixtures must be powered directly off a switched circuit and cannot be run off a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer

channel is used solely for a 0% to 100% switch.

AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that

the fixture you receive is suitable for your local power supply. See the label on the

fixture or refer to the fixture’s specifications chart for more information. A fixture’s

listed current rating is its average current draw under normal conditions. Check the

fixture or device carefully to make sure that if a voltage selection switch exists that it

is set to the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit matches the line

voltage applied. Damage to your fixture may result if the line voltage applied

does not match the voltage indicated on the voltage selector switch. All fix-

tures must be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email. We’ll be happy

to help, honest.

Blizzard Lighting

N16 W23390 Stoneridge Dr. Suite E

Waukesha, WI 53188

www.blizzardlighting.com

414-395-8365

Email: [email protected]

Disclaimer: The information and specifications contained in this document are subject

to change without notice. Blizzard Lighting™ assumes no responsibility or liability for any

errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the

right to update the existing document or to create a new document to correct any errors

or omissions at any time. You can download the latest version of this document from www.

blizzardlighting.com.

Author:

Date:

Last Edited:

Date:

J. Henry

12/31/2013

J. Henry

12/31/2013