Page 12, Chnd, Addr – Blizzard Lighting PixelStorm 240(Rev A) User Manual
Page 12: Pr00-pr25, Sp00, Sp15, Flas, Fade, Fl00, Fl15
Page 12
PixelStorm™ 240 Manual Rev. A
Copyright (c) 2012 Blizzard Lighting, LLC
Setting the DMX Channel Mode:
To control the PixelStorm™ 240 in DMX, first select from one of the DMX control channel modes
(3/4/7/10/16/24, or 28 channel mode.)
1.) To select a DMX channel mode, press the button, then use the
until the display reads
Chnd
and press the button.
2.) Then use the
3.) Press the button to confirm
.
Setting the DMX Address:
1.) Press the button, then use the
Addr
and
press the button.
2.) Use the
d001 -d512
.
3.) Press the button to confirm
.
Built-in Programs:
1.) Press the button, then use the
Pr--
, and
press the button.
2.) Then use the
Pr00-Pr25,
and
press the button.
3.) To adjust the speed, use the
SP--
and press the
button.
4.) Then use the
SP00
to
SP15
.
5.) Press the button to confirm
.
Flash and Fade Modes:
1.) Press the button, then use the
FLAS
or
FAdE,
and
press the
.
2.) Then use the
FL00
to
FL15,
or
FA00
to
FA15
.
3.) Press the button to confirm
.
Auto Mode:
1.) Press the button, then use the
ASC-
and
press the button. This will run
Pr08-Pr25
in sequence.
2.) Then use the
AC00-AC15,
and press
the button.
Sound Active Mode:
1.) Press the button, then use the
SouA
, and
press the button.
2.) Use the sensitivity knob to adjust sound sensitivity.
Custom Color Adjustments:
1.) Press the button until the display reads
r255
(Red intensity, 0-255), or
G255
(Green inten-
sity, 0-255),
b255
(Blue intensity, 0-255)
2.) Please note that these settings will effect the fixture GLOBALLY, IE in any mode.
Slave Mode:
1.) Press the button, then use the
SLAU
and
press the button.