Blizzard Lighting NorthStar Quantum Pro(Rev C) - Manual (Page 11)

Page 11
NorthStar Quantum Pro Manual Rev. C Copyright (c) 2011-12 Blizzard Lighting, LLC
Control Panel Menu Structure
Main Function Sub Function Selection What It Does...
Function Mode
1
DMX Address
1
=000 <-> 255 Sets the DMX address
Set to Slave
2
N/A Sets the fixture to SLAVE mode
Auto Run
3
Program 1-8 Sets the fixture to operate automatically, in one
of 8 preset programs.
=Alone / = Master Sets the fixture as either a standalone or MAS-
TER fixture while in Auto Run mode.
Music Control
4
Program 1-8 Sets the fixture to react to music, in one of 8
preset programs.
=Alone / = Master Sets the fixture as either a standalone or MAS-
TER fixture while in Music Control mode.
Reset
2
N/A = ON / = OFF Performs “power-up” reset and homes all step-
per motors
Reverse Pan
3
N/A = YES / = NO Reverses the fixture’s Pan movement
Reverse Tilt
4
N/A = YES / = NO Reverses the fixture’s Tilt movement
Mic Sensitivity
5
N/A = 0 - 100% Sets the sensitivity of the fixture’s built-in
microphone.
Special
6
Reset Default
1
= OFF / = ON Allows the fixture to be configured for manual
custom operation.
Calibration
2
Code
Allows calibration of the fixture’s PAN and TILT,
after entering the administrator code (088).
= 000 - 255
Pan Calibrates the fixture’s PAN motor. Please note
that this setting is factory set and does not need
to be altered under normal circumstances. = 000 - 255
Tilt Calibrates the fixture’s TILT motor. Please note
that this setting is factory set and does not need
to be altered under normal circumstances. = 000 - 255
Temperature
3
N/A Displays the fixture temperature at the LED
heat sink
Manual Control
4
Pan
Allows manual operation of the fixture by setting
each DMX channel via the front panel
Tilt
Pan Fine
Tilt Fine
Move Speed
Strobe
Dimmer
Red
Green
Blue
White
VCW
Color Fading
R/G/B/W In
A/B/C/D/E/F