Page 10 – Blizzard Lighting EXA HotStik User Manual

Page 10

Page 10

HotStik™ EXA Manual Rev. A

USING THIS FIXTURE WITH THE wiCICLE® WIRELESS

DMX SYSTEM

In addition to the unbridled thrill you al-

ready received the first time you plugged

in your fixture, you’ll be delighted to know

that This fixture also works seamlessly

with our wiCICLE

Wireless DMX system, without additional power.

• ONLY fixtures bearing this logo are certified for use with the wiCICLE

without external power.

• Unauthorized modification and/or using the wiCICLE

with un-

approved fixtures may cause damage to the wiCICLE

or fixture.

UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPON-

SIBLE FOR ANY DAMAGE FROM SUCH OPERATION.

• Fixtures bearing the above logo MUST only use cable and connectors

which separate chassis/case ground from cable shielding. Cabling with

the shield connected to the connector’s case/chassis may cause mal-

function and damage to the wiCICLE

or fixture.

• wiCICLE

transmitters have additional power requirements and

therefore cannot be powered directly from the fixture. You will

need to utilize the supplied AC/DC adaptor to drive wiCICLE

transmitters in your system.

WE HAD THIS SPACE, SO WE FIGURED WE’D DRAW

YOU A PICTURE:

Antenna Housing & 1/2-wave

Antenna

Antenna ferrule & articulation

joint

Stainless Steel Housing

Recessed Selector Button
Status LED

3-Pin XLR Connector

(Male on transmitter, Female

on receiver model)