03ch, 09ch, 13ch – Blizzard Lighting 252 COLORStorm User Manual
Page 10: Addr, A001, Pg00, Pg15, Sp00, Sp15, Fa00-fa15
Page 10
COLORStorm 252 Manual Rev. C
Copyright (c) 2010-12 Blizzard Lighting, LLC
To set the unit in DMX MENU
To control the COLORStorm 252 in DMX MENU, first select from one of the three
DMX control MENUs (3 Channel Mode, 9 Chnanel Mode, or 13 Channel Mode.)
1.) To select 3 Channel MENU, press the Button, then use the
or
03Ch
.
2.) To select 9 Channel Mode, press the Button, then use the
or
09Ch
.
3.) To select 13 Channel MENU, press the Button, then use the
or
13Ch.
To set the DMX address:
1.) Press the button until the display reads
Addr
.
2.) Press the
A001
.
3.) Use the
To run one of 16 built-in programs:
1.) Press the Button until the display reads
PG00
to
PG15
2.) To adjust the program speed, press the Button until the display
reads SP00.
3.) Use the
Sp00
(fastest), and
Sp15
(slowest).
To set the fixture to a flash or fade mode:
1.) Press the button until the display reads
FA00-FA15
(Fade,
fastest <-> slowest), or
FL00-FL15
(Flash, fastest <-> slowest).
2.) Use the
To set the fixture in Sound Active Mode:
1.) Press the button until the display reads
SouF
(Sound Active
Flash Mode) or
SouA
(Sound Active Continuous Mode).
2.) Use the sensitivity knob to adjust sound sensitivity.
To set a custom color in Standalone Mode or adjust overall
color balance:
1.) Press the button until the display reads
r255
(Red intensity,
0-255), or
G255
(Green intensity, 0-255),
b255
(Blue intensity, 0-255)
2.) Please note that these settings will effect the fixture GLOBALLY, IE in any
mode.
To set additional units as slaves while in Program/Sound Ac-
tive/Auto MENU:
1.) Press the and
A001
.