Blaupunkt Phoenix CD70 - Manual (Page 27)

55
DEUTSCH
ENGLISH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
➮
Adjust the minutes with the / but-
ton,
7
.
➮
Press the OK button,
5
or the MENU
button,
8
, to leave the menu. The set-
tings are then saved.
Selecting 12/24-hour clock mode
➮
Press the MENU button,
8
.
➮
Press the or button,
7
, as often
as is necessary for “24 H MODE” or “12
H MODE” to appear in the display.
➮
Press the or buttons,
7
, to switch
between the modes.
➮
Press the OK button,
5
or the MENU
button,
8
, to leave the menu. The set-
tings are then saved.
Having the time displayed
constantly when the device is
switched off
➮
If you want the time to be displayed
when the device is switched of and the
ignition is switched on, press the MENU
button
8
.
➮
Press the or button,
7
, as often
as is necessary for “CLK OFF” or “CLK
ON” to appear in the display.
➮
Press the or button,
7
, to switch
between the display being ON or OFF.
➮
Press the OK button,
5
or the MENU
button,
8
, to leave the menu. The set-
tings are then saved.
Equalizer
This device has a parametric digital equaliz-
er. In this case, parametric means that in each
of the three filters, one individual frequency
can be emphasised or reduced (with a gain
of +8 to -8 dB).
The following filters are available:
●
LOW EQ 32 - 200 Hz
●
MID EQ 250- 1,600 Hz
●
HIGH EQ 2,000 - 12,500 Hz
These filters can be set without using any
measuring instruments. It allows the sound
properties in the vehicle to be significantly
affected.
Adjustment instructions
We recommend using a familiar CD to per-
form this adjustment.
Before making any adjustments to the equal-
izer zero the tone settings and deactivate the
loudness. For more information, read the sec-
tion on “Tone and volume”.
➮
Listen to a CD, tape cassette or Mi-
niDisc (according to how the radio is
equipped).
➮
Compare the sound you hear with how
you feel it should be.
➮
Now consult the “Equalizer adjustment
guide” table for “Tone impression”.
➮
Adjust the equalizer values as de-
scribed under “Action”.
Switching the equalizer on and
off
➮
To switch off the equalizer, press the
DEQ button,
6
.
“LOW EQ” is shown on the display.
➮
To switch off the equalizer, hold down
the DEQ button,
6
until “DEQ OFF”
briefly appears.
EQUALIZER TIME