BBS Lighting Force V+ LED - Manual (Page 7)

USER MANUAL
6
FORCE V
WWW.BROTHERS-SONS.DK
Place the Tubus on a flat surface.
Loosen the Tubus Rotation Lock knob by turning counterclockwise.
Lower the Force V on to the Tubus with the contours aligned
(dashed lines).
Press slightly down on the Force V while turning it
counterclockwise until the Force V drops into place.
Turn the Force V clockwise until the lock tabs snaps into place.
Tighten the Tubus Rotation Lock knob by turning it clockwise.
The designer argues that all I need to say is:
“Loosen the Tubus rotation lock if it is locked, then press the
tubus and the Force V together aligned and turn till the lock
snaps.”
He has got a point but I found this to be the easiest way to
connect them and as I am the one writing this.......
MOUNTING THE TUBUS ON THE FORCE V
Place the fixture on a flat surface.
Loosen the Tubus Rotation Lock knob by turning
counterclockwise.
Retract the Tubus Lock Tabs and turn the Force V
approx. 15 degrees counterclockwise.
Lift the Force V off.
DISMOUNTING THE TUBUS FROM THE FORCE V
software v: 1_3_00 / hardware v. 10 / user manual v. 1.0