Baumfolder Gatefold - Manual (Page 6)

To set the control panel readout for proper machine size and
language, perform the following:
1. Press the main power button in the lower left-hand corner of the
gatefold control to turn power on.
2. Select channel #1 using
the channel selection button.
• The message
“ 1 Falzlange L1”
will appear if the readout is in Deutsche
(German) language.
• If the control is in English the readout will be
“1 Foldlength L1” . If you
need to change the language to English, follow these steps.
2. Press the
enter button in the data entry keys in the lower left-hand
corner. The word “Arbeitbreite 52” will appear.
Use the plus and minus buttons to set the width to 52cm if required.
3. Press the
down arrow button located in the data panel in the lower
left-hand corner. The words “Diagnose” will appear.
4. Press the
down arrow button again and the words
“Sprache (lingua)” will appear.
5. Press the plus or minus button to select English.
6. Press the
confirm button with the arrow going at an angle to secure the
setting. The words “1 Folding Length L1” will appear if channel “1” is
selected.
6