Behringer Eurolive Digital Processor-Controlled 600-Watt 12" PA Speaker System with Integrated Mixer B412DSP - Manual (Page 5)

5
EUROLIVE B412DSP
1. Introduction
IMPORTANT NOTE CONCERNING INSTALLATION
+
The sound quality may diminish within the range of
powerful broadcasting stations and high-frequency
sources. Increase the distance between the
transmitter and the device and use shielded cables
for all connections.
1.1.3 Online registration
Please remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com and
read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have
it repaired as quickly as possible. To arrange for warranty service,
please contact the retailer from whom the equipment was
purchased. Should your BEHRINGER dealer not be located in
your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!
1. Introduction
Thank you very much for expressing your confidence in
BEHRINGER products by purchasing the EUROLIVE B412DSP.
The B412DSP is a state-of-the-art digitally controlled PA speaker
system that will simply blow you away. Its bi-amped 600-Watt
engine drives a high-efficiency 12" woofer for brutal punch and
a 1.75" titanium driver for high-end resolution. The built-in mixer
allows you to run the show without any extra equipment. A
powerful 24-bit DSP controls the crossover, a dual compressor/
limiter, phase and time corrections and even a noise gate. The
intelligent dynamic EQ makes sure your system sounds perfect
at any sound level.
+
Please read this manual to familiarize yourself with
the control elements of the unit and its functions.
After you have carefully read this manual, keep it
for future reference.
1.1 Before you get started
1.1.1 Shipment
Your B412DSP was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of damage.
+
Damaged equipment should NEVER be sent directly
to us. Please inform the dealer from whom you
acquired the unit immediately as well as the
transportation company from which you took
delivery. Otherwise, all claims for replacement/
repair may be rendered invalid.
+
Please always use the original packaging to avoid
damage due to storage or shipping.
+
Never let unsupervised children play with the
B412DSP or with its packaging.
+
Please dispose of all packaging materials in an
environmentally friendly fashion.
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling.
To avoid overheating, do not place the B412DSP on top of power
amps or near radiators, etc.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all international safety
certification requirements.
+
Please make sure that all equipment is properly
grounded at all times. For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cord.