Bang & Olufsen BeoCom 1 - User Guide - Manual (Page 51)

51
INT
1 – 8
Living room
3
s Conference? t
OK
OK
Make an internal conference call
During an external call, you can call another party on an internal
handset to establish a conference call. If one party hangs up, the
call continues with the remaining parties.
Start a conference call with one internal and one external party…
Press to make an internal call during an external
call. The external call is now on hold
Press the number of the handset and the call is
made automatically. Alternatively…
…turn the wheel to search through the internal
listing of handsets and press to make the call.
If the internal call can not be made, you will hear
a busy signal
If the internal call is answered…
Turn the wheel to select Conference? and press
OK to start the conference call
Press to end the conference call
Retrieve the external call if the internal call is not answered…
Press to retrieve the external call on hold. You
can also press
If, for example, there is an active
call on line 1 on another handset in
your system, and you select line 1
on your handset for an outgoing
call, Line is busy appears in the
display. You can still break in – that
is, connect to the active call – by
pressing , followed by OK.
If you have an active call and
another handset elsewhere in the
system is taken off the hook, your
handset emits a single, short beep
to notify you that a third party has
joined the call. This, however, only
happens if the system handsets are
using the same line at the time.